Hey
Czy mogłby ktoś wrzucić link lub w chmure program nubia tools oraz zapodać instrukcję jak zrobić kopię IMEI Czytam ze lepiej zrobić bo potem może być potrzebny
opisywałem na #####, ale teraz coś strona nie działa.
na tym się opierałem (850 post w xda):
1)First ensure that you are on a Nubia factory ROM. Download Nubiatools and jd_gsm_3.61.zip from here https://drive.google.com/folderview?...&usp=drive_web
2)Enble USB debugging on your phone and enable RSA security key box shown, when connected to your PC.
3)Type the following USSD code on the Dialer: *#7678#
4)You will see two blank boxes open up. Tick both boxes you see.
5)Now install this https://yadi.sk/d/MDdWEWs6bvmXw on your windows 7 with your mobile kept on.
6)Once this serial port driver is installed check it on your Device manager-Ports settings. It should show USB Diagnostic MDM port (It,s important that this shows up. No other driver automatically mis-installed will work). Also see that this driver is installed WITH THE PHONE ON and not off...If you power off and press power-Volume-uo/down etc. the wrong driver gets installed automatically which will not work. This is the most important step in this whole process. No correct driver and you cant get Nubiatools to work.
7)Go to the Properties of the port and the tab Port Settings in the upper value of exhibiting 115 200 bps.
8)Now start Nubia tools on your PC
9) Select Tools / Settings. Set baud rate as 115200
10)Select back up and press Settings tab in backup, and set baud rate as 115,200
11)Once your Nubia shows up in the Port fileld, Press START to choose the place where to save the file QCN and click Start All on the panel. After a small amount of time you have your QCN backup.
12)Check if the QCN file has been backed up at the location you chose to.
13)Now follow the directions in the zip file contents to flash the patch files inside the jd_gsm_3.61 zip file (use patch.bat file. Your mobile and Pc should be connected and communication enabled in ADB mode..).
14)Now using Nubia tools use Restore to restore the QCN file to your mobile. (Forgetting this step will leave your phone without IMEI)
15)Now you can do a reboot and you will have Data enabled for 5.1.1 based Nubia factory ROM’s and also the unstable Data issue with 3.14 to 3.20 Rom’s also would be rectified.
, dodatkowo jeszcze wątek z 4pda.ru: http://4pda.ru/forum/index.php?showtopic=659100&st=6160#entry44577311