Mam takie coś cały czas nie próbowałem wgrywać CWM.
SPRÓBOWAŁEM WGRAĆ 4 PLIKOWY ROM TO WYGLĄDA TAK W ODINIE A NA TABLECIE TO SAMO:
/edit po wgraniu CWM TO SAMO JEST 🙁
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BOOTLOADER_T211XXAML1_1272676_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXE_T211OXEAML1_1272676_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> MODEM_T211XXAML2_REV00_CL1383096.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_T211XXAML1_1272676_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> PBL.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> param.lfs
<ID:0/005> loke_2nd.bin
<ID:0/005> loke_pxa988.bin
<ID:0/005> PBL.bin
<ID:0/005> param.lfs
<ID:0/005> loke_2nd.bin
<ID:0/005> loke_pxa988.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img
<ID:0/005> NVM.img
<ID:0/005> radio.img
<ID:0/005> Transmission Complete..
<ID:0/005> Now Writing.. Please wait about 2 minutes
<ID:0/005> Receive Response from boot-loader
<ID:0/005> cache.img
<ID:0/005> hidden.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Removed!!
<ID:0/005> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
dodana zawartość
co doradzisz?
dodana zawartość
@the_naturat_comco doradzisz?