Powinien być widziany przez windows jako qlb...coś w tym stylu.
Nie wiem czy to działa na x play(nie widzę na xda):
Ktoś musi ci zrobić loader.img - root na andku 6 lub 7 potrzebny.
Przez adb lub prościej w terminalu na fonie:
su
dd if=/dev/block/mmcblk0 of=/sdcard/Loader.img bs=1024 count=168960
Opis z wątku na xda(x style):
1. use Diskimage to write .img file on a 32gb card
2. put the card inside the slot
3. boot like you would boot to bootlooder (volume down + power) after some screen flash, it start in bootloader mode.
4. use fastboot to flash rom
STEP BY STEP
Step 1 - Burn the "Loader.img" file to the microSD memory card using the DiskImageRev2 program.
Step 2 - Insert the memory card into the device and turn it on in fastboot mode. There are three possible options: (1) hold down the Power and Volume buttons for at least 10 seconds. (2) Hold the Volume minus button and connect the unit to the computer. (3) Connect the device to the computer, after it is recognized to hold the Power button until it "reboots" it automatically enters fastboot mode.
Step 3 - With the device in fastboot mode, write the ROM normally complete using the Windows command prompt.
Stąd to pochodzi(być może mają dla x play):
http://www.aryk.tech/2017/10/moto-x-pure-unbrick-solutions.html
DiskImage:
https://mega.nz/#!vpsVCDoS!OCl-_2PGEa0YrI4aXNPGBoPSnqR73okTKDp2x1ArfJI
Wątek na xda(x style):
https://forum.xda-developers.com/moto-x-style/help/solved-hard-brick-moto-x-style-xt1572-t3693860
dodana zawartość
@desmo